Global Repair iphone 6s plus 5.5" (model: A1634, A1687, A1699) LCD screen replacement Digitizer Frame Assembly in white
LCD screen for iphone 6s plus 5.5 inch white.
Please check the model of your phone(back side) before installation.(Only model: A1634, A1687, A1699)
This screen compatible for iphone 6s plus 5.5 inch ONLY, NOT for iphone 6 plus 5.5 inch or iphone 6s 4.7 inch.
All products have been test twice before shipping out.
Professional seller, professional product and service.
DIY is not a easy work. If you do not have experience, we advise you let this item connected with some one with experience.
Please follow the directions we have provided.
We do not take responsibility of any damage during installation
Any problem, please contact us firstly. You would always get satisfied solution from us in 24 hours
- Compatible with iphone 6s plus 5.5 inch ONLY, NOT for iphone 6 plus 5.5 inch or iphone 6s 4.7 inch
- Professional repair tool kit is included. Fast and easy to install following the direction. Save 2/3 cost than leaving your phone fixed by Apple store or Repair shop.
- Installation is not easy. If no experience, please let the screen connected by professional
- Technical skills needed. If you have no experience, please exactly follow the directions we provided.
- Professional seller, professional product and service
for iPhone 6s Plus Screen Replacement Touch Screen Digitizer & LCD Display for iPhone 6s Plus(5.5") Black, Compatible Model: A1634, A1687, A1699
1 x iPhone 6s plus Lcd Screen Replacement (black).
1 x Full set professional tools(Philips screwdriver,Pentalobe screwdriver,Triangle pry Pick,Triangle pry stick,Suction cup,Sim card pin.)
Tips before installation:
1) Please keep your phone power off when assembling.
2) Mark the screws places, put the screws you removed on the right place, VERY IMPORTANT, make sure all the screws back to they own threaded hole or it may cause permanent damage to your iPhone.
3) Please connect the flex cable on the dock one by one and make sure all the connector are well seated.
4) Check the LCD to make sure the flexible cable in good condition and no debris/visible dust on the connector.
5) The data cable may pop off, this situation may cause screen white lines or blank screen. When this situation happens, power off and reconnect the cable can solve this problem.
- This screen replacment For iPhone 6s Plus(5.5") ONLY Compatible with Model A1634, A1687, A1699. Please DO NOT use it on iPhone 6 plus or other model.
- The iPhone 6s Plus exclude home buttom,earpiece ,camera,please transfer from your original screen.
- Please watch a YouTube operational video before install replacement screen for iPhone 6s Plus. Be careful and patient can avoid some unnecessary mistakes.
- Replace your damaged, cracked, shattered screen, or screens with display or touch response issues.like dead spots or Irregular lines.
- Package include :1*iPhone 6s Plus screen replacement, 1*Full set repair Tools,1*screen protector
Screen Replacement for iPhone 6S Plus 5.5 inch [Black] - MAFIX LCD 3D Touch Display Digitizer with Ear Speaker, Light Sensors and Front Camera, Fit Model A1634, A1687 with Repair Tools and Protector
We like to call it a win win purchase
? Only fit for iPhone 6S Plus 5.5"((Model A1634, A1687)), please not to try it on iphone 6/ 6S or 6 Plus.
? Other components were Pre-assembled, you only need to remove the home button from your original
screen to the new screen to retain the touch ID/Fingerprint identification function.
? Please test all items before installation for the screen is easily broken,so carefulness is an indispensable part while installing.
? To provide customers the best service, all our products provide unconditional 30-day money back guarantee and 6-month manufactured warranty.
Your packing include:
1 x iPhone 6S Plus screen replacement
1 x 9H Tempered Screen Protector
1 x Philips screwdriver
1 x Pentalobe screwdriver
1 x Triangle pry Pick
1 x Suction cup
1 x Dust wipes
1 x Sim card pin
Please pay attention before the iPhone installation:
1) Please check the LCD to make sure the flex cable is in good condition and there is no debris on the connector.
2) Watch through installation video tutorial before getting started. There are many of these tutorials in YouTube.
3) When reassembling your phone,please power off, and flex cable should connect one by one to the phone motherboard dock well.
4) The display data cable may pop off its connector. This can result in white lines or a blank screen
when powering your phone back on. If that happens, simply reconnect the cable and power cycle your phone.
5) Mark down all the screws you remove while disassembled the screen, incorrect placement of these
screws during reassembly Will cause permanent damage to your iPhone's logic board.
- Fit iPhone 6S Plus Screen 5.5 inch, Fit Model A1634, A1687 (Black), NOT for iPhone 6S / iPhone 6 Plus. Don't confuse it with other version.
- Fast Shipment from Amazon Warehouse. Provide unconditional 30-day money back guarantee. 180-day warranty for non-human damage.
- For defective, cracked, scratched and faulty lcd touch screen. Will share reference installation video with every customer.
- All components were Pre-assembled (include Home Button, Ear Speaker, Approximity Sensor and Front Camera).
- 100% good quality guarantee! We checked the item for twice before sending to our customer! Be careful and patient can avoid some unnecessary mistakes.
for iPhone 6S Plus Screen Replacement, Arotech Pre-Assembled 5.5 Inch LCD 3D Touch Display Digitizer Assembly Kit with Repair Tool, Compatible with A1634 A1687 A1699 All Version (White)
-Only fit for iPhone 6S Plus 5.5" (A1634/ A1687/ A1699), NOT for iPhone 6 Plus.
-Please email to us if have any product issue, we will make our best to provide good service for you.
-We will be responsible for any damage during shipping or quality problem. 180 DAYS WARRANTY are provided.
1.Please watch our video before installation.
2.Disconnect the battery cable before installation or make sure your phone is powered off.
3.There are many screws when you replacing the assembly which are different in size and length.it may broke the screen if you put the screw in wrong place.
4.If after install the screen there appear regular lines on the screen or the screen can't be touched, please Remove the LCD screen and clean the connectors. Lines are normally caused to the LCD cable is not correct clipped or some dust in the connectors.
Question and Answer:
Q: Why my phone works but the screen is not displaying?
A: When reassembling your phone, the display data cable may pop off its connector. This can result in white lines or a blank screen. If that happens, simply reconnect the cable, also disconnect and reconnect the battery connector.
Q: Why the touch function of the screen is not working correctly?
A: This is because the digitizer cable might lose connection if not plugged in firmly, you can transfer the foam that attaches to the back of original digitizer cable connector onto the new one.
Q: When the screen is placed on phone the phone no longer comes on or seems black
A: Reset the phone by holding both Power and Home button together pressed for min 15 sec.
- Enter promotion code 8WHLKA94 to Save 5% each on Qualifying items offered by Arotech when you purchase 2 or more.【Screen Compatibility】Only fit for iPhone 6S Plus 5.5 inch (A1634/ A1687/ A1699), NOT for iPhone 6 Plus or other iPhone Model. Please make sure your iPhone model.
- 【Easy Installation】All components are Pre-Assembled, include, ear piece, front camera, proximity sensor holder, for those parts, you just need to replace your damaged, cracked, shattered, faulty display screen. Save your much time! Please Note: This screen replacement is NOT include Home Button, you need to transfer your original Home Button from your old screen. But you would receive the video installation guide via Youtube link, easy to install.
- 【Great Screen Replacement】For cracked, broken, damaged, faulty display screen, fix touch response issues. This is the good screen replacement what you are looking for. And the item have Quality Guaranteed, each item was double tested before shipping.
- 【What You Get】All our customers would receive the video installation guide via Youtube link ,easy for everyone to do it. You could get our online support if you have any questions. It comes with the 9H hardness tempered glass screen protector for your iPhone. Extra protection for your new screen.
- 【Great Customers Service】You will enjoy a high quality customers service at Arotech which you will have a 30 day unconditional return policy and 6 month a non-human damage warranty for the screen. If you have any question, please email to us and we will make our best to help you to solve the problem.
for iPhone 6s Plus Touch Screen Replacement - Yodoit LCD Display Digitizer Glass Full Assembly with Small Parts Camera Proximity Sensor Home Button Earpiece Speaker 3D Touch + Tool (5.5 inches Black)
* Color: Black
* Compatible with: iPhone 6s Plus (5.5 inches) ONLY.
* Model Number: A1634, A1687
* This replacement screen includes the spare parts (front camera, proximity cable, home button,ear speaker, metal shield plate), you do not need to disassemble those parts and assemble to the new screen
This part will be only compatible with an iPhone 6s Plus, but not an iPhone 6 Plus, 6 or 6 Plus. Please make sure you identify your iPhone correctly before purchase.
* Touch ID is not available. One motherboard matches one Touch ID. Please note that only the phone's original home button assembly will be capable of using the Touch ID functionality. Installing a new home button will only restore ordinary home button functions, not the Touch ID features.
* When you replace the assembly, please mind that there are many screws which are different in size and length. You'd better to mark them otherwise it will break the screen if you put the screw in wrong place.
* If the phone is deformed, it is easy to get stuck when installation or cracked after installation, please correct your phone rear case first.
* The replacement is a fragile product, please be very careful in the whole process. Any man-made damage always caused in the process, the detailed installation video should be viewed on YouTube.
* You can search the internet and find some tutorial videos for reference if you decide to replace the screen by yourself. Professional and skilled installation are recommended.
* 1 x New iPhone 6s Plus LCD Screen and Digitizer
* 1 x Pentalobe 5-point screwdriver
* 1 x Phillips #000 screwdriver
* 2 x Plastic opening tool
* 1 x Small Suction Cup
* 2 x Spudger
- 【Express Repair】: Replace your broken screen replacement in under 30 minutes! You just watch a YouTuBe video, according to the video operation, you can easily install an iPhone 6s Plus screen replacement
- 【Small Parts Pre-assembled】: This iPhone 6s Plus screen replacement comes with small parts (front camera, earspeaker, proximity cable, home button, shield plate), you do not need to disassemble those parts and assemble to the new screen
- 【The Simplest Repair Option】: This iPhone 6s Plus screen replacement with small parts makes your repair easier, cuts repair time, and reduces risk of damage. New small parts are factory installed for a precise fit. You don't have to transfer from old screen
- 【To Retain Touch ID】: The Touch ID function will only work with your phone's original home button assembly. You will need to transfer the button assembly from your old display to retain Touch ID
- 【Compatibility】: The LCD screen included in the kit is only compatible with the iPhone 6s Plus version only (A1634, A1687). If unsure of your iPhone model, check the rear of the phone
Premium Screen Replacement, Compatible iPhone 6S Plus 5.5inch (Model A1634, A1687) LCD Replacement Screen with 3D Touch Screen Digitizer Fram Assembly Full Set + Free Tools (Black)
1.Preassembled screen included: Outer glass + Touch digitizer + LCD screen + Frame
2.Only fit Compatible iPhone 6S plus 5.5inch(Model A1634, A1687). not for other model
3.To replace your old, broken, cracked, damaged faulty display with LCD touch Screen
4.Without home button, ear piece, front camera, proximity sensor holder, please transfer original materials from your old screen..
5.Fast shipping from USA(FBA)+Free tool+guide
1.Disconnect the battery cable before installation or make sure your phone is powered off.
2.There are many screws when you replacing the assembly which are different in size and length.it may broke the screen if you put the screw in wrong place.
3.If camera and speaker can't be use, please check if you put the camera and speaker in right place and try to installation the screen again.
4.If after install the screen there appear regular lines on the screen or the screen can't be touched, please Remove the LCD screen and clean the connectors.Lines are normally caused to the LCD cable is not correct clipped or some dust in the connectors.
5.Please email to me if any product issue, I will try my best to provide good service for you.
1x LCD Screen
1x Replacement Repair Tools Kit
1x Repair Manual
- 1. Only Compatible iPhone 6S plus 5.5inch(Model A1634, A1687), not for other model
- 2. Brand-new, 100% tested before shipping and working perfectly
- 3. To replace your old, broken, cracked, damaged faulty display with LCD touch Screen
- 4. Without home button, ear piece, front camera, proximity sensor holder,please transfer original materials from your old screen.
- 5. Good customer service and Fast shipping from USA(FBA)+Free tool+Repair Manual
Oli & Ode Compatible with iPhone 6S Plus Screen Replacement (5.5 Inch), LCD Digitizer Touch Screen Assembly Set with 3D Touch, Repair Tools and Replacement Manual Included (Black)
iPhone 6S Plus replacement screen Black (5.5 Inch)
1. Please make sure you are a special repair technician, otherwise you will break the product.
2. Please test it by inserting the flex to your motherboard before installation, be sure you feel a gentle snap. If not, then try again, or the cable will not be connected properly and will not work functionality.
If you meet some problems like can't turn on, touch insensitive, flash, lines on screen etc, please follow below steps:
1. Please check the LCD to make sure the flex cables are in good condition and there are no debris on the connector.
2. Disconnect and reconnect the flex cables from the motherboard side.
3. Then Reboot: Hold buttons (Home, Up volume, and Power button) untill the phone switch down and then switch up again.
4. Make sure IOS has been upgraded to the latest version.
5. Please leave phone alone overnight and see if this problem persists in the morning. Sometimes there is static after installing that will go away after some time.
1* iPhone 6S plus (5.5 Inch) LCD replacement assembly kit
1* Set Repair Tool Kits,
Warning: No protection & Inappropriate installation may cause injury. Please follow installation guide step by step.
1.Check the package before open it. If found break, Please contact Amazon or Seller for exchange.
2.Please switch off phone to avoid any electrical injury before installation.
3.Not charge phone to avoid any electrical injury during replacement
- 1. iPhone 6S plus screen replacement White Compatible with models: A1634, A1687, A1699
- 2. The LCD is without home button, ear piece, front camera, proximity sensor holder, front camera holder, you need to transfer from old screen.
- 3. 100% Inspected by professional QC team before shipping, 30-days return policy&warranty.
- 4. Please update iOS 11.3 through iTunes, DO NOT update directly through your phone, it might be make your phone keep getting Apple boot-loop.
- 5. Package include: LCD Screen, tool kit,gift, step by step instruction.
ZTR LCD Screen Compatible with iPhone 6s Plus 5.5 inch Replacement digitizer Display Frame Front Glass Full Assembly White
Brand "ZTR" screen replacement for iphone 6s plus 5.5 inch ONLY (model: A1634, A1687, A1699) Splecialist in iphone screen business for years.Replacement Accessory is the best.
Replace&repair faulty screen: display problems, dead pixels, cracked LCD screens, wrong color issues.
Each screen is tested before shipping.Product was cushion wrapped including the necessary tools.
Ps: This item is without home button , camera , ear piece . Please check carefully before buying.(please rest assure that you can remove all of those kit from original screen)
1. Please check the item appearance carefully at the first time when you received it to confirm whether there is appearance breakage. If any problems, Please do not hesitate to contact us and providing photos for the problem. We will resolve it for you soon.
2. Do not install the item immediately after received . We will send you YOUTUBE link through Email please remember check your Amazon message first.
3. Please note that there are many screws when you replace the assembly.They are different sizes and length. You'd better to mark them Or it will be easy broke the screen if you put the screw in wrong place.
Notice We are responsible for any damage during transit or quality problem. One Year Warranty,Buy With Confidence.
Customer Support Have patience. The replacement process is not complicated at all. If you have any question.Please contact us, We will provide professional customer service.
- Compatible with iPhone 6S plus 5.5" only, Model NO.: A1634, A1687, A1699
- Package include: 1x White Assembly LCD Digitizer for iPhone 6S plus 5.5, 1x repair Tool kits, 1x instruction
- If your device that works great, but the display is damaged in some way, this product is what you need. Direction and tools are included. Fast and easy to install following the direction.
- Each item is tested before shipping to ensure 100% functionality.
- It is used to repair faulty screen, this will also cure: display problems, dead pixels, cracked screens, wrong color issues
SZRSTH Compatible with iPhone 6S Plus Screen Replacement White 5.5 Inch LCD Display with 3D Touch Screen Digitizer Frame Full Assembly Include Full Free Repair Tools Kit+Instruction+Screen Protector
Model:6S Plus ( A1634, A1687, A1699)
1xScreen Replacment for iphone 6S Plus
1x Magnetic Screw Holder
1x Pentable Screwdriver
1x Cross Screwdriver
1x Suction Cup
1x SIM eject tool
2x Plastic Disassembly Pry Tools
2x Cleaning cloths
1x Screen protector
1x Repair Flowchart
1.It is best to watch the repair videos before install or find a professional to repair if you are not sure with replace.
2. Disconnect the battery cable or make sure the phone is turned off before installing. This step will protect your phone from improper installation damage.
3. using Magnetic Screw Holder to mark the position of each screw when you unscrew the screws. Due to the different lengths of the screws,screw placed in the wrong hole may damaged the screen.
4.Not include the home button, front facing camera, earpiece speaker.You need to transfer these parts from your old display assembly to your new part.
5.The flex cables are very fragile,please be careful to remove them during the process of replacing the screen replacement parts.During installing, don't press the both upper corners,or the lcd screen will be damaged.
For question regarding the warranty or product, please send e-mail to contact customer service in advance, we will help you solve the problem as soon as possible and give you a satisfied solution.
- 🔰Compatible with 6s plus screen white（A1634, A1687, A1699).NOT for 6 Plus or 6s LCD,please make sure your phone model.
- 🔰Used for replacing cracked,broken, dead pixy, damaged,touch respons issues,wrong color issues, non-functioned screen.
- 🔰Without home button, front facing camera, earpiece speaker.Please transfer them from your original phone.
- 🔰All products are strictly tested before shipment. Life Time Warranty, which you can purchase with 100% confidence.
- 🔰Professional after sales services team.Any issue you met with our screen,contact us,we will help you solve within 24 hours.
iPhone 6S Plus Screen Replacement 3D Touch LCD Touch Screen Digitizer Frame Assembly Set (White)
DESCREPTION Are you worried you need to buy a new iPhone due to your cracked screen or display issues? Instead of buying something new, simply repair it! Our iPhone 6s Plus LCD and screen replacement kit includes everything you need to successfully fix your phone. Our kits include the outer glass screen, Digitizer, LCD (all connected as one part) and proper tools to put it all together. We are based in the US and our LCD screens are expertly designed to fit your phone 6s Plus, our outer glass screens are scratch and shatter resistant. So what are you waiting for? Save your hard-earned money and fix your phone yourself!
- COMPATIBILITY: This replacement repair tools kit is only compatible with iPhone 6S plus 5.5 inch screen assembly only, please do not confuse it with other version
- FUNCATION: Replace your damaged, cracked, shattered screen, or screens with display or touch response issues. Do not press aggressively on both upper corners of the new screen
- NOTE: Should transfer home button with finger print sensor, front camera flex cable and silver metal plate from your old phone
- INSTALLATION: Please watch a YouTube video tutorial before install replacement screen for iPhone 6s plus. Be careful and patient can avoid some unnecessary mistakes
- The iPhone 6S plus LCD screen and digitizer assembly is available in black and white, and this is the white one.